Facing Red Light Issue with Netgear N300 WiFi Extender?

Is the LED on your Netgear N300 wireless extender blinking red? If the answer to the question is yes, then congratulations! You have landed on the right page in search of a solution. Here, we have discussed about the various reasons why you’re facing the red light issue with your Netgear N300 extender along with the solutions to fix the issue. So, read on.

Reasons behind Netgear N300 Extender Red Light Issue

  1. Outdated Firmware

One of the major reasons why you’re struggling with the red light issue is because the firmware of your Netgear N300 extender is not updated. Therefore, make sure that the firmware of your wireless device is updated to the latest version.

Here is how to perform Netgear extender firmware update:

  • Switch on your computer and open an internet browser.
  • In the address bar of the internet browser, type mywifiext.net.

Note: Consider accessing mywifiext.local if you are using an Apple device to log in to your Netgear N300 wireless range extender.

  • Press the Enter key.
  • You will get welcomed by the Netgear extender administrative page.
  • Fill in the default username and password and click Log In.
  • On the BASIC Home screen, head over to the Settings menu.
  • Go to Administration and select the Firmware Update option.

If even after updating the firmware of your device, you are facing the red light issue, continue reading.

  1. Improper Location

If you haven’t placed your Netgear N300 range extender at the ideal location, then also you can come across the red light issue. To troubleshoot it, it is recommended that you change the location of your WiFi device.

Make sure that it is placed in a neat and clean area. Also, ensure that your extender is not placed in corners or near thick concrete walls.

  1. WiFi Interference

Not only is it essential to place your extender at the ideal location but to also keep it away from physical obstructions. If your Netgear N300 extender is placed near transmitting appliances, electronic devices, reflexive surfaces, and metal objects, then it’s no shocker why you’re experiencing the red light issue.

Therefore, keep your extender away from any device that can interfere with its signals.

  1. Technical Glitches

Sometimes, technical glitches can also force the LED on your Netgear N300 extender to flash red. But, fret not. To get rid of these glitches, reboot your device. Here’s how:

  • Power off your Netgear N300 extender and unplug it from the wall outlet.
  • Wait for some time.
  • Then, plug your N300 extender back into the socket and turn it on.

Still having a hard time because of the Netgear N300 extender red light issue? Well, in that case, give the next troubleshooting hack a try.

  1. Improper Setup

Did you not properly perform Netgear N300 setup? It looks like it. Otherwise, you wouldn’t be struggling with the red light issue. Thus, refer to the guidelines given in the user manual and configure your wireless range extender from scratch.

How to Perform Netgear Extender Factory Default Reset?

In order to set up your Netgear N300 wireless range extender from the beginning, you need to reset it first. Follow the instructions mentioned below and learn how to restore your device to the factory default settings:

  • Locate the Reset button on your extender.
  • Found? Good. Now, carefully press it using an oil pin.
  • Wait for a couple of seconds.

As soon as your Netgear N300 extender gets restored to the default mode, connect your computer to Netgear_ext, and reconfigure your device.

Summing Up

Our guide to troubleshooting the Netgear N300 extender red light issue has come to an end here. Here is to hope that the tips mentioned above were able to help you get rid of the issue you were facing with your wireless device.

Love & Share